|
Nylon/Brass Drift Punch 1/4" Aluminum Punch Tip
Your Price:
$4.49
Retailer:
Brownells
Great combination punch for gunsmith machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: Nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action; Brass for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington Shotgun Punch Tip for removing trigger plate pins from 870 1100 and 1187. Supplied as: Basic Set with two 5/16" diameter tips (one Nylon one Brass) and one Handle. 4-Way Set includes fo Mfg: Brownells SPECS: Handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Tips are 1¼" (3.2cm) long.
Click for more information from Brownells
|
|
Nylon/Brass Drift Punch 1/4" Brass Punch Tip
Your Price:
$4.99
Retailer:
Brownells
Great combination punch for gunsmith machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: Nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action; Brass for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington Shotgun Punch Tip for removing trigger plate pins from 870 1100 and 1187. Supplied as: Basic Set with two 5/16" diameter tips (one Nylon one Brass) and one Handle. 4-Way Set includes fo Mfg: Brownells SPECS: Handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Tips are 1¼" (3.2cm) long.
Click for more information from Brownells
|
|
Nylon/Brass Drift Punch 4-Way Nylon/Brass Punch Set
Your Price:
$18.99
Retailer:
Brownells
Great combination punch for gunsmith machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: Nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action; Brass for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington Shotgun Punch Tip for removing trigger plate pins from 870 1100 and 1187. Supplied as: Basic Set with two 5/16" diameter tips (one Nylon one Brass) and one Handle. 4-Way Set includes fo Mfg: Brownells SPECS: Handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Tips are 1¼" (3.2cm) long.
Click for more information from Brownells
|
|
Nylon/Brass Drift Punch 3/16" Brass Punch Tip
Your Price:
$3.39
Retailer:
Brownells
Great combination punch for gunsmith machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: Nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action; Brass for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington Shotgun Punch Tip for removing trigger plate pins from 870 1100 and 1187. Supplied as: Basic Set with two 5/16" diameter tips (one Nylon one Brass) and one Handle. 4-Way Set includes fo Mfg: Brownells SPECS: Handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Tips are 1¼" (3.2cm) long.
Click for more information from Brownells
|
|
Nylon/Brass Drift Punch 5/16" Brass Punch Tip
Your Price:
$3.49
Retailer:
Brownells
Great combination punch for gunsmith machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: Nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action; Brass for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington Shotgun Punch Tip for removing trigger plate pins from 870 1100 and 1187. Supplied as: Basic Set with two 5/16" diameter tips (one Nylon one Brass) and one Handle. 4-Way Set includes fo Mfg: Brownells SPECS: Handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Tips are 1¼" (3.2cm) long.
Click for more information from Brownells
|
|
1/4" Brass Drift Punch Brass Drift Punch
Your Price:
$4.49
Retailer:
Brownells
A harder-than-nylon but softer-than-steel punch for drifting fixed sights without damage. Mfg: Brownells SPECS: Steel handle replaceable brass tip. 3¾" (9.5cm) long.
Click for more information from Brownells
|
|
Nylon/Brass Drift Punch 5/16" Aluminum Punch Tip
Your Price:
$4.99
Retailer:
Brownells
Great combination punch for gunsmith machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: Nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action; Brass for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington Shotgun Punch Tip for removing trigger plate pins from 870 1100 and 1187. Supplied as: Basic Set with two 5/16" diameter tips (one Nylon one Brass) and one Handle. 4-Way Set includes fo Mfg: Brownells SPECS: Handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Tips are 1¼" (3.2cm) long.
Click for more information from Brownells
|
|
Dasco Dasco 1 4 in Drift Punch 0606-0
Your Price:
$8.82
Retailer:
BIC Warehouse
1/4? drift punch Wide, utility punch, with complete taper heat-treated Strong points and target head render long service 1/4? point, 9? taper, 12? long Brand #: Dasco 0606-0 UPC: 018371060608 Keywords: punch drift
Click for more information from BIC Warehouse
|
|
Lyman Brass Tapper And Drift Punch Lyman Brass Tapper And Drift Punch
Your Price:
$17.49
Retailer:
Sinclair International
Hammer has three heads; brass nylon and steel. Two heads mount to the blued steel hammer head to the blued steel hammer head the third attached to the base of the knurled brass handle. Brass drift punch stores in handle. Great for knocking out pins. Mfg: Lyman
Click for more information from Sinclair International
|
|
KD Tools Punch Drift Brass - KDT33205
Your Price:
$19.99
Retailer:
Advance Auto Parts
MPN #KDT33205. KD Tools Punch Drift Brass. Most Cutting and Drilling Tools products are available for in-store pickup from Advance Auto Parts.
Click for more information from Advance Auto Parts
|
|
Nylon/Brass Drift Punch 6-Way Nylon/Brass Punch Set
Your Price:
$23.47
Retailer:
Brownells
Great combination punch for gunsmith machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: Nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action; Brass for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington Shotgun Punch Tip for removing trigger plate pins from 870 1100 and 1187. Supplied as: Basic Set with two 5/16" diameter tips (one Nylon one Brass) and one Handle. 4-Way Set includes fo Mfg: Brownells SPECS: Handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Tips are 1¼" (3.2cm) long.
Click for more information from Brownells
|
|
Nylon/Brass Drift Punch Nylon Punch Tip
Your Price:
$3.39
Retailer:
Brownells
Great combination punch for gunsmith machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: Nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action; Brass for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington Shotgun Punch Tip for removing trigger plate pins from 870 1100 and 1187. Supplied as: Basic Set with two 5/16" diameter tips (one Nylon one Brass) and one Handle. 4-Way Set includes fo Mfg: Brownells SPECS: Handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Tips are 1¼" (3.2cm) long.
Click for more information from Brownells
|
|
Nylon/Brass Drift Punch Remington Shotgun Punch Tip
Your Price:
$4.99
Retailer:
Brownells
Great combination punch for gunsmith machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: Nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action; Brass for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington Shotgun Punch Tip for removing trigger plate pins from 870 1100 and 1187. Supplied as: Basic Set with two 5/16" diameter tips (one Nylon one Brass) and one Handle. 4-Way Set includes fo Mfg: Brownells SPECS: Handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Tips are 1¼" (3.2cm) long.
Click for more information from Brownells
|
|
Starter Punches 1/8" (3.2mm) Starter Brass Punch
Your Price:
$6.94
Retailer:
Brownells
For drifting sights driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium brass hex. Starter Punch Set includes 4 flathead tapered punches for drifting sights and driving pins flush. Includes plastic storage pouch for easy access. Punches also available separately. Mfg: Grace SPECS: Starter Punch Set - 4 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" dia.
Click for more information from Brownells
|
|
|
Starter Punches 3/32" (2.4mm) Starter Brass Punch
Your Price:
$6.94
Retailer:
Brownells
For drifting sights driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium brass hex. Starter Punch Set includes 4 flathead tapered punches for drifting sights and driving pins flush. Includes plastic storage pouch for easy access. Punches also available separately. Mfg: Grace SPECS: Starter Punch Set - 4 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" dia.
Click for more information from Brownells
|
|
Starter Punches 1/16" (1.6mm) Starter Brass Punch
Your Price:
$6.94
Retailer:
Brownells
For drifting sights driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium brass hex. Starter Punch Set includes 4 flathead tapered punches for drifting sights and driving pins flush. Includes plastic storage pouch for easy access. Punches also available separately. Mfg: Grace SPECS: Starter Punch Set - 4 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" dia.
Click for more information from Brownells
|
|
|
Starter Punches 5/32" (4mm) Starter Brass Punch
Your Price:
$6.94
Retailer:
Brownells
For drifting sights driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium brass hex. Starter Punch Set includes 4 flathead tapered punches for drifting sights and driving pins flush. Includes plastic storage pouch for easy access. Punches also available separately. Mfg: Grace SPECS: Starter Punch Set - 4 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" dia.
Click for more information from Brownells
|
|
Roll Pin Punches 13/32" (2.4mm) Roll Pin Punch
Your Price:
$6.94
Retailer:
Brownells
For drifting sights driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium brass hex. Roll Pin Punch Set includes 8 roll pin punches with ends that fit around roll pins without drifting off. Mfg: Grace SPECS: Brass 5⁄16" (7.9mm) hex stock. Punch Set/Roll Pin Punch Set - 8 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" 3⁄16" 7⁄32" ¼'' 5⁄16" dia. Starter Punch Set - 4 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" dia.
Click for more information from Brownells
|
|
|
Roll Pin Punches 3/16" (4.8mm) Roll Pin Punch
Your Price:
$6.94
Retailer:
Brownells
For drifting sights driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium brass hex. Roll Pin Punch Set includes 8 roll pin punches with ends that fit around roll pins without drifting off. Mfg: Grace SPECS: Brass 5⁄16" (7.9mm) hex stock. Punch Set/Roll Pin Punch Set - 8 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" 3⁄16" 7⁄32" ¼'' 5⁄16" dia. Starter Punch Set - 4 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" dia.
Click for more information from Brownells
|
|
|
Roll Pin Punches 1/4" (6.4mm) Roll Pin Punch
Your Price:
$6.94
Retailer:
Brownells
For drifting sights driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium brass hex. Roll Pin Punch Set includes 8 roll pin punches with ends that fit around roll pins without drifting off. Mfg: Grace SPECS: Brass 5⁄16" (7.9mm) hex stock. Punch Set/Roll Pin Punch Set - 8 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" 3⁄16" 7⁄32" ¼'' 5⁄16" dia. Starter Punch Set - 4 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" dia.
Click for more information from Brownells
|
|
Nylon/Brass Drift Punch Basic Nylon/Brass Punch Set
Your Price:
$6.99
Retailer:
Brownells
Great combination punch for gunsmith machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: Nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action; Brass for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington Shotgun Punch Tip for removing trigger plate pins from 870 1100 and 1187. Supplied as: Basic Set with two 5/16" diameter tips (one Nylon one Brass) and one Handle. 4-Way Set includes fo Mfg: Brownells SPECS: Handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Tips are 1¼" (3.2cm) long.
Click for more information from Brownells
|
|
Brownells Brass Drift Punch Brass Drift Punch
Your Price:
$7.99
Retailer:
Brownells
BROWNELLS BRASS DRIFT PUNCH Mfg: Brownells
Click for more information from Brownells
|
|
Alignment & Push Punches .120" Brass Alignment & Push Punch
Your Price:
$8.99
Retailer:
Brownells
For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly too. Furnished with a large easy-to-grasp handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the AR-15 1911 Auto Remington 870 and Ruger Revolvers. Won't roll off bench. Alignment/Push Punch Set includes one each of the punches liste Mfg: Brownells SPECS: Handle - Plastic. Shank - Unhardened steel drill rod or 360 alloy brass . 3¼" (8.2cm) long. OAL - 4¾" (12.1cm) long. Alignment/Push Punch Set - Contains (4) brass and (4) steel punches (1) brass and (1) steel of each diameter: .092" (2.3mm) .120" (3mm)
Click for more information from Brownells
|
|
Brass Drift Punches - punch brass drift
Your Price:
$13.2
Retailer:
CJXbeta_Smarter.com
OMX4308: This item features: -Non-sparking. -Non-marring. -Prevents damage to object being struck. -Tip Size: 1/2 in. -Stock Shape: Hex. -Overall Length: 8 in. -Tip Type: Round. -Material: Brass. -Type: Cylinder Punch. -Wt.: 0.46 lb. -Price is for 1 Each.
Click for more information from CJXbeta_Smarter.com
|
|
Starter Punches Starter Punch Set 4 Pc
Your Price:
$20.99
Retailer:
Brownells
For drifting sights driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium brass hex. Starter Punch Set includes 4 flathead tapered punches for drifting sights and driving pins flush. Includes plastic storage pouch for easy access. Punches also available separately. Mfg: Grace SPECS: Starter Punch Set - 4 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" dia.
Click for more information from Brownells
|
|
Nylon Front-Sight Drift Punch Nylon Drift Punches
Your Price:
$4.99
Retailer:
Brownells
This handy little punch is made for just one purpose . . . to drive the front sight in or out without marring it or the barrel. We first tried Brass but as you know it leaves a "Brass tracking" wherever it rubs. We then tried fiber but after a few hard blows it shatters. NYLON doesn't mark the barrel or sight nor does it shatter or lose its shape after hard and prolonged use. Mfg: Brownells SPECS: 4" (10.2cm) long. 5/16" (7.9mm) diameter. Polyenco Nylon. Sold in a set of 3.
Click for more information from Brownells
|
|
Nylon Front-Sight Drift Punch Nylon Drift Punches
Your Price:
$4.99
Retailer:
Police Store
This handy little punch is made for just one purpose . . . to drive the front sight in or out without marring it or the barrel. We first tried Brass but as you know it leaves a "Brass tracking" wherever it rubs. We then tried fiber but after a few hard blows it shatters. NYLON doesn't mark the barrel or sight nor does it shatter or lose its shape after hard and prolonged use. Mfg: Brownells SPECS: 4" (10.2cm) long. 5/16" (7.9mm) diameter. Polyenco Nylon. Sold in a set of 3.
Click for more information from Police Store
|
|
|
Nylon Front-Sight Drift Punch Nylon Drift Punches
Your Price:
$4.99
Retailer:
Police Store
This handy little punch is made for just one purpose . . . to drive the front sight in or out without marring it or the barrel. We first tried Brass but as you know it leaves a "Brass tracking" wherever it rubs. We then tried fiber but after a few hard blows it shatters. NYLON doesn't mark the barrel or sight nor does it shatter or lose its shape after hard and prolonged use. Mfg: Brownells SPECS: 4" (10.2cm) long. 5/16" (7.9mm) diameter. Polyenco Nylon. Sold in a set of 3.
Click for more information from Police Store
|
|
|
Roll Pin Punches 5/16" (7.9mm) Roll Pin Punch
Your Price:
$6.94
Retailer:
Brownells
For drifting sights driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium brass hex. Roll Pin Punch Set includes 8 roll pin punches with ends that fit around roll pins without drifting off. Mfg: Grace SPECS: Brass 5⁄16" (7.9mm) hex stock. Punch Set/Roll Pin Punch Set - 8 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" 3⁄16" 7⁄32" ¼'' 5⁄16" dia. Starter Punch Set - 4 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" dia.
Click for more information from Brownells
|
|
|
Roll Pin Punches 1/16" (1.6mm) Roll Pin Punch
Your Price:
$6.94
Retailer:
Brownells
For drifting sights driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium brass hex. Roll Pin Punch Set includes 8 roll pin punches with ends that fit around roll pins without drifting off. Mfg: Grace SPECS: Brass 5⁄16" (7.9mm) hex stock. Punch Set/Roll Pin Punch Set - 8 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" 3⁄16" 7⁄32" ¼'' 5⁄16" dia. Starter Punch Set - 4 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" dia.
Click for more information from Brownells
|
|
|
Roll Pin Punches 5/32" (4mm) Roll Pin Punch
Your Price:
$6.94
Retailer:
Brownells
For drifting sights driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium brass hex. Roll Pin Punch Set includes 8 roll pin punches with ends that fit around roll pins without drifting off. Mfg: Grace SPECS: Brass 5⁄16" (7.9mm) hex stock. Punch Set/Roll Pin Punch Set - 8 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" 3⁄16" 7⁄32" ¼'' 5⁄16" dia. Starter Punch Set - 4 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" dia.
Click for more information from Brownells
|
|
Brass Punch Set 1/8" (3.2mm) Brass Pin Punch
Your Price:
$7.99
Retailer:
Brownells
For drifting sights driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium brass hex. Punch Set includes 8 flathead long shaft punches for driving pins completely out. Mfg: Grace SPECS: Brass 5⁄16" (7.9mm) hex stock. Punch Set - 8 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" 3⁄16" 7⁄32" ¼'' 5⁄16" dia.
Click for more information from Brownells
|
|
|
Brass Punch Set 5/16" (7.9mm) Brass Pin Punch
Your Price:
$7.99
Retailer:
Brownells
For drifting sights driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium brass hex. Punch Set includes 8 flathead long shaft punches for driving pins completely out. Mfg: Grace SPECS: Brass 5⁄16" (7.9mm) hex stock. Punch Set - 8 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" 3⁄16" 7⁄32" ¼'' 5⁄16" dia.
Click for more information from Brownells
|
|
Roll Pin Punch Set Roll Pin Punch Set
Your Price:
$100.99
Retailer:
Brownells
We combined 19 of our most popular roll pin punches and added a handy bench block to come up with the perfect punch set for the busy shop or department armor. Easily start remove and install spring pins and roll pins in firearms without damage to the pin or firearm. Features (5) holder punches (7) starter punches and (7) standard punches that can easily handle any job out there. Made from solid steel with parallel-ground shanks and knurled handles. Also includes a non-marring nylon drift punch that won't damage or scrape delicate surface finishes. Machined Delrin bench block holds and organizes all the punches for easy access. Holder punches cup and hold roll pins keeping Mfg: Brownells SPECS: Punches - Steel knurled handle matte black. Nylon Punch - 4" (10cm) long x 5⁄16" (7.9mm) diameter. Holder Punches - Contains (1) of each diameter: 1⁄16" (1.6mm) 5⁄64" (2mm) 3⁄32" (2.4mm) 1⁄8" (3.2mm) 9⁄64" (3.5mm).
Click for more information from Brownells
|
|
Deluxe Punch Bench Set Pin Punch Set
Your Price:
$104.99
Retailer:
Brownells
This deluxe punch set gives you a versatile selection of 20 punches to easily start remove and install pins align holes plus drift and stake sights without marring the part or firearm finish. We combined alignment punches flat tip mini punches starter punches a nylon drift punch and a center and prick punch with our most popular pin punches then added a machined Delrin bench block to hold and organize them all for easy access. Punches are constructed of hardened steel with parallel-ground shanks and either knurled or hexagonal handles. The nylon drift punch is solid nylon and can be shaped for your specific application. Alignment punches feature a tapered pin with a working leng Mfg: Brownells SPECS: Steel knurled or hexagonal handle except nylon drift punch is solid nylon. Nylon Punch - Contains (1) 4" (10cm) long x 5/16" (7.9mm) diameter. Alignment Punches - Contains (1) of each diameter: .070" (1.8mm) to .156" (4.0mm); .110" (2.8mm) to .187" (4.7m
Click for more information from Brownells
|
|
Brass Punch Set Brass Punch Set
Your Price:
$109.99
Retailer:
Brownells
Precision machined non-marring brass punches drift sights and drive pins without risk of damage to the sight pin or firearm. We combined 20 of our most popular non-marring brass punches added a compact bench block and came up with a great addition for the work bench. Features (4) starter punches (8) roll pin punches and (8) standard punches for a variety of different jobs. Delrin bench block holds and organizes all 20 punches for easy access plus is resistant to most solvents. Starter punches are used to start the removal of steel or aluminum pins. Short tapered shaft is extra stiff to prevent bending and twisting. Roll Pin punches feature a special tip that centers inside the h Mfg: Brownells SPECS: Brass. Starter Punches - Contains (1) of each diameter: 1⁄16" (1.6mm) 3⁄32" (2.4mm) 1⁄8" (3.2mm) 5⁄32" (4mm). Roll Pin Punches - Contains (1) of each diameter: 1⁄16" 3⁄32" 1⁄8" 5⁄32" 3⁄16"
Click for more information from Brownells
|
|
Pistol Punch Set Pistol Punch Set
Your Price:
$15.99
Retailer:
Brownells
Five steel and brass gunsmith punches handle a variety of any pistol disassembly and reassembly jobs. Each precision-machined punch is through-hardened for maximum strength. Knurled handles ensure a firm grip to prevent slippage and protect your gun's finish from scratches and scuffs. Mfg: Lyman SPECS: Pin punches - 4140 chrome-moly steel. A - 3-3/8" (9.2cm) x 5/32" (4mm) diameter. B - 3-5/8" (9.2cm) long x 3/32" (2.4cm) dia. D - 4½" (11.4cm) long x 5/32" (4mm) dia. F - 4¼" (10.8cm) long x 1/8" (3.2mm) dia. Drift punch brass. 3&f
Click for more information from Brownells
|
|
Brownells Roll Pin Punches Roll Pin Punch Kit
Your Price:
$19.99
Retailer:
Brownells
The ONLY way to properly install or remove roll pins without damage to either the pin or the surrounding metal. A small raised projection in the face of the punch automatically centers the punch and prevents the roll pin from collapsing. Mfg: Mayhew Steel SPECS: #1 1⁄16" (1.6mm) x 23⁄4" (7cm) L; #2 5⁄64" (2mm) x 3¼" (8.2cm) L; #3 3⁄32" (2.4mm) x 3½" (9cm) L; #4 1⁄8" (3.2mm) x 4" (10.2cm) L; #6 3⁄16" (4.8mm) x 4½" (11.4cm) L.
Click for more information from Brownells
|
|
Roll Pin Punches Roll Pin Punch Set 8 Pc
Your Price:
$29.99
Retailer:
Brownells
For drifting sights driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium brass hex. Roll Pin Punch Set includes 8 roll pin punches with ends that fit around roll pins without drifting off. Mfg: Grace SPECS: Brass 5⁄16" (7.9mm) hex stock. Punch Set/Roll Pin Punch Set - 8 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" 3⁄16" 7⁄32" ¼'' 5⁄16" dia. Starter Punch Set - 4 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" dia.
Click for more information from Brownells
|
|
Pin Punch Set Grace Punch Kit
Your Price:
$32.99
Retailer:
Brownells
This set will cover 90% of your shop needs and gun pin needs. Mfg: Grace SPECS: 1 starter punch 1 center punch 5 drift punches (1/16" 5/64" 3/32" 1/8" & 5/32" diameters.)
Click for more information from Brownells
|
|
|
Roll Pin Punches 7/32" (5.3mm) Roll Pin Punch
Your Price:
$6.94
Retailer:
Brownells
For drifting sights driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium brass hex. Roll Pin Punch Set includes 8 roll pin punches with ends that fit around roll pins without drifting off. Mfg: Grace SPECS: Brass 5⁄16" (7.9mm) hex stock. Punch Set/Roll Pin Punch Set - 8 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" 3⁄16" 7⁄32" ¼'' 5⁄16" dia. Starter Punch Set - 4 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" dia.
Click for more information from Brownells
|
|
Alignment & Push Punches Alignment/Push Punch Set
Your Price:
$60.95
Retailer:
Brownells
For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly too. Furnished with a large easy-to-grasp handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the AR-15 1911 Auto Remington 870 and Ruger Revolvers. Won't roll off bench. Alignment/Push Punch Set includes one each of the punches liste Mfg: Brownells SPECS: Handle - Plastic. Shank - Unhardened steel drill rod or 360 alloy brass . 3¼" (8.2cm) long. OAL - 4¾" (12.1cm) long. Alignment/Push Punch Set - Contains (4) brass and (4) steel punches (1) brass and (1) steel of each diameter: .092" (2.3mm) .120" (3mm)
Click for more information from Brownells
|
|
|
Brass Punch Set 7/32" (5.3mm) Brass Pin Punch
Your Price:
$7.99
Retailer:
Brownells
For drifting sights driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium brass hex. Punch Set includes 8 flathead long shaft punches for driving pins completely out. Mfg: Grace SPECS: Brass 5⁄16" (7.9mm) hex stock. Punch Set - 8 punches: 1⁄16" 3⁄32" 1⁄8" 5⁄32" 3⁄16" 7⁄32" ¼'' 5⁄16" dia.
Click for more information from Brownells
|
|
Brass Punch Set Bench Block Only
Your Price:
$9.99
Retailer:
Brownells
Precision machined non-marring brass punches drift sights and drive pins without risk of damage to the sight pin or firearm. We combined 20 of our most popular non-marring brass punches added a compact bench block and came up with a great addition for the work bench. Features (4) starter punches (8) roll pin punches and (8) standard punches for a variety of different jobs. Delrin bench block holds and organizes all 20 punches for easy access plus is resistant to most solvents. Starter punches are used to start the removal of steel or aluminum pins. Short tapered shaft is extra stiff to prevent bending and twisting. Roll Pin punches feature a special tip that centers inside the h Mfg: Brownells SPECS: Brass. Starter Punches - Contains (1) of each diameter: 1⁄16" (1.6mm) 3⁄32" (2.4mm) 1⁄8" (3.2mm) 5⁄32" (4mm). Roll Pin Punches - Contains (1) of each diameter: 1⁄16" 3⁄32" 1⁄8" 5⁄32" 3⁄16"
Click for more information from Brownells
|
|
Deluxe Punch Bench Set Bench Block Only
Your Price:
$9.99
Retailer:
Brownells
This deluxe punch set gives you a versatile selection of 20 punches to easily start remove and install pins align holes plus drift and stake sights without marring the part or firearm finish. We combined alignment punches flat tip mini punches starter punches a nylon drift punch and a center and prick punch with our most popular pin punches then added a machined Delrin bench block to hold and organize them all for easy access. Punches are constructed of hardened steel with parallel-ground shanks and either knurled or hexagonal handles. The nylon drift punch is solid nylon and can be shaped for your specific application. Alignment punches feature a tapered pin with a working leng Mfg: Brownells SPECS: Steel knurled or hexagonal handle except nylon drift punch is solid nylon. Nylon Punch - Contains (1) 4" (10cm) long x 5/16" (7.9mm) diameter. Alignment Punches - Contains (1) of each diameter: .070" (1.8mm) to .156" (4.0mm); .110" (2.8mm) to .187" (4.7m
Click for more information from Brownells
|
|
Roll Pin Punch Set Bench Block Only
Your Price:
$9.99
Retailer:
Brownells
We combined 19 of our most popular roll pin punches and added a handy bench block to come up with the perfect punch set for the busy shop or department armor. Easily start remove and install spring pins and roll pins in firearms without damage to the pin or firearm. Features (5) holder punches (7) starter punches and (7) standard punches that can easily handle any job out there. Made from solid steel with parallel-ground shanks and knurled handles. Also includes a non-marring nylon drift punch that won't damage or scrape delicate surface finishes. Machined Delrin bench block holds and organizes all the punches for easy access. Holder punches cup and hold roll pins keeping Mfg: Brownells SPECS: Punches - Steel knurled handle matte black. Nylon Punch - 4" (10cm) long x 5⁄16" (7.9mm) diameter. Holder Punches - Contains (1) of each diameter: 1⁄16" (1.6mm) 5⁄64" (2mm) 3⁄32" (2.4mm) 1⁄8" (3.2mm) 9⁄64" (3.5mm).
Click for more information from Brownells
|
|
Drift
Your Price:
$11.99
Retailer:
Best Buy
Track Listing: 1. Drift, 2. Mean as a Swan, 3. Toque, 4. Creep, The, 5. Lady Red, 6. Teo Walks, 7. Duty Free Suite, 8. Dry Socket, 9. Afro Blake, 10. Maria, 11. Residence
Click for more information from Best Buy
|
|
Drift
Your Price:
$15.99
Retailer:
Best Buy
Track Listing: 1. I Knew That, 2. Everytime You Go, 3. Turn You Around, 4. Drift, 5. Almost Made You Smile, 6. Alone In the Dark, 7. Someone To Talk To, 8. Necessary Evil, 9. As Far As You Can Go, 10. I Don't Want to Be Like This, 11. Until The Light Shines Through
Click for more information from Best Buy
|
|
Brownells Diy Remington 700 Timney Trigger Replacement Kit Diy Rem 700 Trigger Replacement Kit
Your Price:
$195.99
Retailer:
Brownells
This Brownells DIY Remington 700 Trigger Replacement kit contains all the parts and tools you need to swap out the trigger of your 700 for one that offers a smoother lighter pull and a precise crisp break for more accurate shot placement. Without a good trigger it's almost impossible to shoot accurately and this kit will help you improve your rifle's accuracy by upgrading it with a Timney drop-in trigger module.The Timney Model 510 trigger is a self-contained unit that completely replaces the Remington 700 factory trigger. It takes about 20 minutes to install using the tools contained in this kit and requires no drilling tapping grinding or permanent changes to your rifle's re Mfg: Brownells SPECS: Kit contains Timney 510 Remington 700 trigger module Brownells Rifle Bench Block Grace pin punch set with 1 starter punch 1 center punch 5 drift punches (1/16" 5/64" 3/32" 1/8" & 5/32" diameters) 1" nylon/brass hammer and instructions.
Click for more information from Brownells
|
|
Brownells Diy Trigger Replacement Tool Kit Brownells Diy Trigger Replacement Tool Kit
Your Price:
$73.99
Retailer:
Brownells
The Brownells DIY Bolt Action Trigger Tool Kit contains the basic tools you need to remove a factory trigger and install an aftermarket replacement on many bolt action rifles including the Remington 700. Installing a new trigger is easy when you have the right tools. The kit has three basic components starting with the super-tough polyethylene Brownells Rifle Bench Block to provide a stable surface when driving pins out of the rifle action. The center V-groove keeps cylindrically-shaped parts steady so they won't roll. The Grace Pin Punch Set has seven punches for driving out and installing action pins. It contains 1 starter punch 1 center punch and 5 drift punches that will not on Mfg: Brownells SPECS: Kit contains Brownells Rifle Bench Block Grace pin punch set with 1 starter punch 1 center punch 5 drift punches (1/16" 5/64" 3/32" 1/8" & 5/32" diameters) 1" nylon/brass hammer and instructions.
Click for more information from Brownells
|